Challenging yet noble, we aim to tackle the Malaysian health ministry’s statistic.

  • Follow Us:
  • FB

AQUAHOME

Model 1054AS

Daily Midnight Backwash

To achieve just clean water, but more critically clean filter.

 

AquaHome 1054AS

Love the unpolluted water from deep in the jungle? As a nature lover, how nice it would be to have this as your tap water at home.

Only with automatic backwash activated carbon media filter, achieving such quality water can be possible. Although not fully sterillized, bacteria are strictly put under control.

While others emphasize on the cleanliness of the water, our emphasis is on CLEAN FILTER, because a DIRTY FILTER will produce clean, but NOT HEALHY water.

The benefits of daily mid-night backwash operation by AquaHome's automatic valve:-

  1. Usually the flow-rate of city water supply is much higher during or after mid-night, thus enabling it to achieve the basic requirement of higher-than-usual backwash flow-rate.
  2. The presence of high residual chlorine in our city water helps to sterilize the top portion of the carbon bed during normal filtration and the lowest portion during backwash. However, only a very high backwash flow-rate will enable the chlorine to have full contact with the whole carbon bed. Coupled with frequent backwashing, bacteria will not have sufficient time to colonize within the carbon bed.

RM 3,600

(including installation)

High Quality Filter Media

Dirt/Sediments

Rust

THM (also prevents)

Herbicide/Pesticide

MTBE

Chlorine

Organic Matter

Atrazine

Radon

and much more.

Why auto-backwash?

Just for the sake of easy operation?

Bear in mind, healthy treated water cannot be achieved without the right (not merely easy) operation.

The right operation: backwashing frequently with extra high flow-rate.

Getting rid of the hustle (complicated process practiced by professionals worldwide) and vet complying with the above requirements; replacing it with daily midnight backwash is simply the right solution.

Operating Procedure

3 steps cleaning process

Stage 1: Normal Filtration

Treating raw water by allowing it to flow (through the filter media) from top to bottom.

Stage 2: Backwash Operation

High velocitv water flows upward from the bottom. Thus, loosening the filter media and creating a passage to allow trapped sediment to be flushed out efficiently.

Stage 3: Rinsing

Same flow pattern as normal filtration but water is drained off instead to assure clean water before consumption - all in a short time.

Automatic Backwash Multi-Port Valve

Effectively repeats the cycle of backwash and rinse to ensure thorough cleaning of filter media.

Our Assurance on Water Quality

No maintenance is required because the system automatically back flushes, rinses and cleans itself every midnight.

100%

Assurance on Quality

0%

Maintenance

UNIQUE INSTALLATION

Another plus point of loading the sand media into the filter tank on-site is maintaining transparency. Our greatest niche is the additional procedure called “Air Scouring”; a standard procedure done by all large- scale professional water filter system, including every municipal treatment plant worldwide. For your information, no one can guarantee that the graded sand has been thoroughly cleaned by chlorinated water at the quarry. The most that ordinary installers can do for you is to repeat the usual backwash after installation. This procedure is unable to lift up dirt or sediment which are trapped deep below the surface of the sand media. It is well-proven that air scouring is able to lift up the impurities onto the surface Of the sand bed, which later on, are easily drain Off by normal backwash.

 

Not just clean water, but more critically, clean filter

MAINTENANCE SERVICE

Thorough Cleaning

Inclusive

(for the initial installation of model: AquaHome 846AS and 1054AS)

Read More